TechniSat DVB-PC TV Star PCI Driver

TechniSat DVB-PC TV Star PCI Driver

Here in this post, we have a driver for TechniSat DVB-PC TV Star PCI. This is a PCI TV card, we have drivers for Windows XP, Vista, and Windows 7 Operating System. Also, in this post, we have an application for this TV card.

TechniSat DVB-PC TV Star PCI Minimum system requirements

For this TV card, you must have a PC with Pentium III 700MHz or higher Processor.
The minimum of your computer RAM must be 256MB.
Your free hard disc space must be at least 60MB, and you must have a compatible audio Sound Blaster, and 1 available PCI slot.

TechniSat DVB-PC TV Star PCI

TechniSat DVB-PC TV Star PCI Hardware ids

PCI\VEN_13D0&DEV_2103&SUBSYS_210313D0&REV_02
PCI\VEN_13D0&DEV_2103&SUBSYS_210313D0
PCI\VEN_13D0&DEV_2103&CC_028000
PCI\VEN_13D0&DEV_2103&CC_0280

Note: Perhaps before the installation will be necessary to download and install WinRar.(Here you can download WinRar).

You can Download TechniSat DVB-PC TV Star Driver here and the application

The Driver Download

The applicationDownload

How to install the driver, follow the instructions listed below

Installation instructions: for Windows Vista and 7

On the computer (My Computer) click right click and then Properties and go to Device manager and find a missing device then click right click on the missing device and Update Driver Software

 and choose to Browse my computer for driver software.

 Find where you download and extract driver and choice (The downloaded driver folder) then click ok.

 And then click ” Next ” And your driver will start installing,

 And after installation, you need to restart the computer and enjoy it.

Installation instructions: for Windows XP

Go to the device manager and find a missing driver then click right click on him and Update Driver.

 Select on: “No, not this time” and press next

 Select “Install from a list or specific location (Advanced)” and click next

 Find where you have download and extract the driver and choice (the Driver) then click ok

 Click ” OK” And after this, your driver will start installing

 And after installation, you need to restart the computer and enjoy

I hope that this article “TechniSat DVB-PC TV Star Driver” would be helpful for you

 

Add a Comment

Your email address will not be published. Required fields are marked *